top of page

Fireproofing & Thermal Barriers: What Every Commercial Property Owner Must Know

9 hours ago
2 min read
Spray-applied fireproofing covering structural steel beams and ceiling

Fireproofing and thermal barriers both contribute to safer commercial buildings, but they serve different purposes. Fireproofing is used to help protect structural components and assemblies from fire exposure, while thermal barriers are commonly used to separate foamed-plastic insulation from occupied spaces. For commercial property owners in Kitchener-Waterloo, understanding the difference can help avoid costly mistakes during construction or renovation.


Additionally, Ontario’s current Building Code includes technical requirements related to fire protection as well as specific provisions for protecting foamed plastics. 


Where Is Fireproofing Commonly Used in Commercial Buildings?

Commercial building fireproofing is often used where building components require protection to achieve the fire-resistance performance required by the design.


Structural steel is one important example. Depending on the building and assembly, structural steel fireproofing may involve products such as intumescent fireproofing, which forms a protective layer when exposed to heat, or cementitious fireproofing, a sprayed-on material used to protect structural components.


These fire-resistant coatings form part of a broader passive fire protection strategy. Unlike active systems such as sprinklers, passive measures are incorporated into the building itself to help limit the effects of fire.


Fireproofing vs. Thermal Barriers: What’s the Difference?

Fireproofing protects building components or assemblies, while a thermal barrier is commonly used to protect combustible insulation such as spray foam from adjacent spaces.


This distinction matters when planning commercial fire protection. A coating intended for structural steel should not automatically be assumed to perform the same function as a thermal barrier for spray foam, or vice versa.


Ontario's Building Code specifically addresses the protection of foamed plastics used in wall and ceiling assemblies and recognizes compliant thermal barriers among the permitted methods in applicable situations. 


FAQ 

When Does Spray Foam Need a Thermal Barrier?

Whether spray foam requires a thermal barrier depends on the building, assembly, occupancy and applicable Code requirements. For example, foamed-plastic insulation in certain wall or ceiling assemblies must be protected from adjacent spaces using an acceptable method.


That is why choosing fireproofing and thermal barriers should start with the project specifications and applicable Code requirements rather than a one-size-fits-all product recommendation.


Can a Thermal Barrier Be Applied Over Existing Spray Foam?

Potentially, but the existing installation and proposed barrier system need to be assessed first. Product compatibility, substrate condition, required performance and the intended use of the assembly all matter. The National Research Council of Canada notes that construction product assessments consider both a product's intended function and where it is intended to be used. 


What Fire-Resistance Ratings Are Required for Commercial Buildings in Ontario?

There is no single fire-resistance rating that applies to every Ontario commercial building. Requirements depend on factors such as the building's construction, occupancy and the particular assembly involved. Ontario's Building Code contains the technical requirements used for building design and construction, including fire protection provisions. 


Property owners and contractors should therefore confirm project-specific requirements before selecting or applying a fireproofing system.


Need Guidance on Your Commercial Project?

Fireproofing and thermal barriers in Kitchener-Waterloo address different fire-safety needs, so choosing the right system starts with understanding the building, materials and applicable requirements. Contact Enerliv Insulation for professional guidance, a consultation or an estimate for your project.


We provide professional insulation services across the following areas: Kitchener-Waterloo, Cambridge, London, Hamilton, Mississauga, Burlington, Oakville, Guelph, Brantford, and Port Credit.

 
 
 

Comments


bottom of page